In Progress Qobuz Connect 16/44.1 issue with playback
- Thread starter DanCollier
- Start date
In Progress
This is related to users with specific dacs unable to play 16 bit content via Qobuz Connect.
Hi, Qobuzz connect works flawlessly on my system (tried with various dacs). The problem is afterwards, sometimes I have to turn the dac on/off so that I can stream music, for example, from the actual sense app. Thought initialy that it was my dac, but just had the same problem connecting a different DAC (via usb to streamer)
This sounds like it’s happening to me. Strangely not with everything, but if a particular artist is affected it does seem to be their entire catalogue. The main one for me is Genesis. I’ve tried to look for a pattern but can’t see anything other than the above. RME ADI2 DAC
Having said I couldn’t see a pattern (beyond it affecting an artist’s entire catalogue) Ive just noticed one! The mention of DRM made me think and I notice in addition to Genesis, it affects the catalogues of Lindisfarne and Van Der Graf Generator. These three were all on the Charisma label in the 70s, not sure what became of that?
Hi,
I think you'll find that both of those artists entire catalogues on Qobuz are all specifically in 16/44.1 as per the issue described in this post. This is why you're unable to play these back via Qobuz Connect for now. A fix is imminent for this. Of course, you can simply play these directly in Sense till.
I can confirm this is a problem for me. High-res Qobuz tracks play fine however.
If this issue is DAC-specific, then my setup is Zenith Mk3 => PhoenixUSB => Gustard R26 (with external Mutec clock)
If this issue is DAC-specific, then my setup is Zenith Mk3 => PhoenixUSB => Gustard R26 (with external Mutec clock)
It is indeed specific to Dacs, I use a Chord Dac myself and also have the issue. The Dac we use on our ZEN/PulseMini however do not have this issue. I have seen 2 users with Gustard Dacs including yourself experience this issue. We're working on a solution for this, of course in the meantime, continue to use Sense
.Not to add unnecessary fuel to the fire, but I am having different Qobuz Connect problems. I am using a DAC2 inside a McIntosh 9500 integrated.
First, every time I sign in I have to go to a window and select my Innuous Zennith mk.3. I can’t figure out how to set the Innuous as default. The default is currently set as my iPhone.
Second, there are times when I try to play an album and the bottom window, which shows what is supposed to be playing, shows the album cover flying by like the frames of a movie reel.
Hopefully, these problems will be fixed when all the other problems are fixed.
Thanks for your help!
First, every time I sign in I have to go to a window and select my Innuous Zennith mk.3. I can’t figure out how to set the Innuous as default. The default is currently set as my iPhone.
Second, there are times when I try to play an album and the bottom window, which shows what is supposed to be playing, shows the album cover flying by like the frames of a movie reel.
Hopefully, these problems will be fixed when all the other problems are fixed.
Thanks for your help!
Hi,
We have no control over the behaviour of the native Qobuz app, so these two issues are likely not caused by our system.
Regarding the first, I don't believe this is a fault (I could be wrong, but I see no literature from Qobuz on this), but rather the standard behaviour of the Qobuz app, however I don't personally use it enough to notice as I use Sense mostly.
The second issue does seem unusual. I would recommend reporting it directly to Qobuz, as it may be specific to the device you’re using or the version of the app installed.
Thanks for getting back to me. I didn’t know the source of the problems so I thought I would report them. If I keep using Connect, which I doubt, I’ll get in touch with Qobuz.
Similar threads
