In Progress Sense 3.4 Beta Testing

[Stephen Healy]

I have not noticed a new music issue on my Zenith...
However, I still have the issue that any restart of the Zenith will automatically start music playing on all my outputs, whether DAC connected by USB, LMS speakers on the network or UPnP connected Receivers/DACs... The same happens on individual players when I start them: for example when I turn on my USB-connected Devialet Expert Pro, it immediately continues to play whatever was playing before there, despite my having stopped the music there. Only radios may be exempt from restarting to play, but not sure. I will have to test. that again. Local and Qobuz tracks definitely start playing each time I restart either the Zenith or the amp/speakers/dac...

I can replicate some of this to an extent; if a DAC is powered back on when the Innuos is already on and has tracks in the queue, then yes it will resume playback. If that DAC is suddenly turned off or disconnected, then Sense will defer to the next available 'player' and if that has tracks remaining in a queue, then may automatically begin playing those. But initiating playback on all devices at the same time after powering on the Innuos, that I cannot replicate or understand - I have some SenseUPnP devices here and they remain silent when restarting or turning on my Innuos. Do you ever use grouping for Squeeze/airplay zones?

 

[malfordlad]

With SenseUPnP at version 3.4.0-7 beta playing to Naim NSS33 streamer, I pressed pause in Sense but the streamer jumped to the next track played 40 seconds of that track and skipped on the next track. It repeated this to the end of the album and started to repeat from track 1, playing 40 seconds and skipping again.

I am still finding this to be a problem occasionally with 3.4.0-8 beta. It does not occur for every track, just the odd one. I have seen this with Qobuz played through Sense (not Qobuz connect).

 

[guardajoias]

I can replicate some of this to an extent; if a DAC is powered back on when the Innuos is already on and has tracks in the queue, then yes it will resume playback. If that DAC is suddenly turned off or disconnected, then Sense will defer to the next available 'player' and if that has tracks remaining in a queue, then may automatically begin playing those. But initiating playback on all devices at the same time after powering on the Innuos, that I cannot replicate or understand - I have some SenseUPnP devices here and they remain silent when restarting or turning on my Innuos. Do you ever use grouping for Squeeze/airplay zones?

I have sometimes used the grouping, but not recently and I have no active groupings working for now... When I restart the Innuos, each player/speaker continues its own queue, so typically different music on each device...

 

[DanCollier]

I have sometimes used the grouping, but not recently and I have no active groupings working for now... When I restart the Innuos, each player/speaker continues its own queue, so typically different music on each device...

We've replicated this and will add it to the backlog, thank you .