BIOS Update for ZENmini Mk3 with serials starting with 20

[NVitorino]

All ZENmini Mk3 units with a serial number starting with 20 will need a firmware update for the mainboard (BIOS) in order to prevent future issues.

Prerequisites​

This update applies only to ZENmini Mk3 music servers with a serial number starting with 20. Other ZENmini Mk3 do no require the update.
This update should be applied only to a system that is working normally. This BIOS update will not resolve issues.

You will need:

1. Monitor/TV with HDMI input
2. USB Keyboard
3. Free USB stick with at least 1GB

How to Update​

You can download the full instructions for the update here: BIOS Update manual
The ISO image with the update can be downloaded here: BIOS Update Image

Need Help?​

If you need help applying this firmware update, please contact your Innuos dealer for help. Any issues while updating please contact Innuos Support and we'll be happy to help.

 

[Chris]

Thanks for the clarification Phil. I’ll give it a go. Just got to scrounge a usb keyboard as ours are all wireless!!

 

[Phill r]

Thanks for the clarification Phil. I’ll give it a go. Just got to scrounge a usb keyboard as ours are all wireless!!

I used a wireless one and if was fine as the boot process is sliw enough to allow the dongle to start up

 

[Chris]

Worth knowing but I think I’ve sourced a usb one.